CVE-2026-99554

In the Linux kernel, the following vulnerability has been resolved:

net: usb: pegasus: do not advance rx_skb->data on dropped frames

For the 0x8513 chip, read_bulk_callback() skips the 2-byte receive
header by advancing pegasus->rx_skb->data in place. This is done before
the pkt_len > PEGASUS_MTU check, and when that check drops the frame
the good path resubmits the same skb with the advanced rx_skb->data as
the transfer buffer, still PEGASUS_MTU bytes long.

Every frame with an oversized length field therefore moves the receive
buffer two more bytes towards the end of the skb data area. A device
that keeps sending such frames makes the host controller write received
data over skb_shared_info and past the end of the allocation, and the
corrupted skb_shared_info is used when the skb is eventually freed.
With an emulated device sending frames filled with 0x5a on a KASAN
kernel:

BUG: KASAN: slab-out-of-bounds in dummy_timer+0xade/0x3f00 [dummy_hcd]
Write of size 1536 at addr ffff888105821202 by task swapper/1/0
…
Oops: general protection fault, probably for non-canonical address 0xeb4b474b4b4b4b4c: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x5a5a5a5a5a5a5a60-0x5a5a5a5a5a5a5a67]
RIP: 0010:skb_release_data+0x36f/0x800

Only skip the header with skb_reserve() once the frame is going to be
passed up, so the receive buffer always starts at the beginning of the
skb data area. Unlike the old pointer adjustment, skb_reserve() also
moves skb->tail, so the two header bytes now count against the buffer
size: lower the length limit for the 0x8513 accordingly, otherwise a
pkt_len of PEGASUS_MTU – 1 or PEGASUS_MTU would trip skb_over_panic().

Found by code review with LLM assistance and reproduced with an
emulated USB device (raw-gadget + dummy_hcd).

Bu kayıt NIST NVD kaynağından aktarılmıştır. Etkilenen sürümler, güncel değerlendirme ve üretici referansları için kaynak kaydı inceleyin.

← Tüm yazılara dön